♦ Swing over bed : 880/1,100 mm
♦ Swing over cross slide : 540/670 mm
♦ Dist between centers : 1,700/2,200/3,200/4,200/5,200/6,200/7,200 mm
♦ Spindle speed : 40~1,500 rpm
♦ X,Y axis rapid feedrate : 10/8 m/min
1. The spindle headstock: Equipped 3-step gear change (hyd. System) Spindle bore: φ130mm, φ160mm, φ180mm, φ255mm, φ305mm.
2. Dovetail type guide way design for X axis, it can be maximized the swing over cross-slide diameter.
3. Manual tailstock, quill dia. φ165mm, MT6 for center taper and the manual tailstock lubrication system are all standard.
| ■ Standard Accessories | ■ Optional Accessories | |||
| 1 | Cooling device | 1 | 10", 12", 16" 3 jaws scroll chuck | |
| 2 | Lubricating system | 2 | 10", 12", 15", 18" hyd. chucks | |
| 3 | Manual triple vari-speed headstock | 3 | 16", 20", 26" manual 4 Jaws | |
| 4 | Manual two step tailstock | independent chucks | ||
| 5 | Fully enclosed splash guard | 4 | Headstock auto. hyd. speed shifting | |
| 6 | Work Lighting | 5 | V8 turret | |
| 7 | Tools & Tool box | 6 | Hyd. tailstock centers | |
| 7 | Auto. square swivelling turret | |||
| 8 | V8 driven tool system | |||
| (not including tool holder) | ||||
| 9 | Drill tool holder | |||
| 10 | Bearing steady rest | |||
| (30~280mm)，(60~360mm) | ||||
| 11 | Bronze follow rest (30~140mm) | |||
| 12 | Chip conveyors | |||
| 13 | Cs axis function | |||
| 14 | Rear spindle support chuk | |||
| 15 | CE approval specification | |||
| 16 | Transformer | |||
Comment