024.3554.3470/71 /+84972.853.570

topwinnerhn@gmail.com

TOP WINNER REPRESENTATIVE OFFICE IN HA NOI CITY
    Vcenter-AX630
    Vcenter-AX630
    Vcenter-AX630
    Vcenter-AX630
    Vcenter-AX630
    Vcenter-AX630
    Vcenter-AX630
    (No comments yet)
    Vcenter-AX630
    五軸加工中心機, VICTOR台中精機,
    The product is out of stock

    ♦ X/Y/Z axis travel : 700/500/500 mm

    ♦ Table work area : Ø630 x 500 mm

    ♦ Max. Table weight : 300 kgs

    ♦ Ragid feedrate : 48 / 48 / 48 m / min

    ♦ Spindle speed : 12,000 rpm (15,000 rpm opt.)

    ♦ Cutting feedrate :  20 m/min

    • High rapid feed 48 m/min with roller type linear motion guideways for 3 axes.
    • Trunnion type tilting table (B+C axes) fixed on machine base enhances structure stiffness.
    • Backlash-less roller-cam drive mechanism rotated at higher speed further reduce the cycle time.
    • BIG-PLUS BT-40 (BBT-40) spindle 12000rpm (15kW).
    Item   Unit Vcenter-AX630
    Travel X axis travel mm 700
    Y axis travel mm 500
    Z axis travel mm 500
    Distance Spindle center to column
    (vertical milling)    		 mm 300
    Spindle nose to table surface
    (or table center)    		 mm 100~600
    Spindle center line to table surface
    (horizontal milling)    		 mm  
    Height from table surface
    (or table center) to floor    		 mm 766
    Table Table work area mm Ø630 x 500
    Dimension of T-slot mm 5 x 18H7 x 100
    Max. table load (rotary) kg 300
    Max. table load (fixed + rotary) kg  
    Spindle Spindle taper   BBT-40
    Spindle motor - cont / 30 / 10min kW 11/15/18.5 (w/t CTS)
    7/11/15 (w. CTS
    Spindle speed rpm 12000 (opt. 15000)
    Linear
    feed rate    		 Rapid feed rate - X/Y/Z m/min 48 / 48 / 48
    Axis feed motor - X/Y/Z kW  7 / 4 / 7
    Cutting feedrate by table m/min 20 (opt. 30)
    Linear guide width (X/Y/Z) mm 45 / 45 / 45
    Ballscrew dia x pitch (X/Y/Z) mm Ø40x16 (X/Y/Z)
    Rotary
    feed rate    		 Tilting (swivel) / rotary angles deg. -30 ~ 110 / 360
    Rotary rapid feed rate rpm 16.7 / 33.3 (B/C)
    Axis feed motor kW 3 / 1.6 (B/C)
    Continuous indexing resolution deg. 0.001 (roller cam drive)
    Continuous torque output N-m 3988 / 1738 (B/C)
    Braked torque (clamping) N-m 5880 / 1960 (B/C)
    Tools Max. tool length mm 300
    Max. tool weight kg 7
    Magazine capacity   30 (opt. 40, 60)
    Max. tool diameter (without adjacent tools) mm 76 (125)
    Tool exchange time sec. 2.5 (T-T), 5.5 (C-C)
    Pull stud angle deg. 15 (JIS 40P)
    Tool selection method   Random
    Machine Power requirement kVA 33 (excl. CTS) Fanuc
    42 (excl. CTS) Heidenhain
    Min/Max. air pressure kg/cm2 5.5 ~ 6.5
    Coolant tank capacity L 400
    Std. NC controller (Fanuc)   0i-MF (10.4”)
    Floor space requirement (with conveyor) mm 3581 x 4475
    Max. machine height mm 3038
    Machine weight kg 9000

    * Standard Accessories.

    1. Fully enclosed splash guarding

    2. Spindle oil coolant

    3. T nuts table slot

    4. Hand tools and toolbox

    5. Work light

    6. Rigid tapping

    7. Remote MPG

    8. Auto power off system

    9. Auger conveyor

    10. Leveling pads

    11. Fanuc e-book

    * Optional Accessories.

    1. Air conditioner for electric cabinet

    2. Augular encoder

    3. Chip conveyor

    4. Coolant through spindle

    5. Auto tool length measurement

    6. Auto part measuring

    7. HSK-A63 tooling

    8. Auto door

    9. Table shower system

    10. Air gun

    11. Oil hole coolant

     

    12. Linear scales

    13. Fanuc manual

    14. Hydraulic ports on table

    15. 5-axis simultaneous control

    16. Top covers

     

     

     

     

     

     

    Customer ratings

    5.0
    5
    0%
    4
    0%
    3
    0%
    2
    0%
    1
    0%

    Share product reviews

    Rate and comment

    Send your comment

        Comment

        Submit a comment
        Comment
          • No products in the shopping cart